Sunlu FilaDryer S4 Filament Dryer 320–330 W 4 Spools
4 spools with 8 filament outlets, Up to 70 °C, ±3 °C stability, Warm-up Time to 50 °C: 30 min, Automatic humidity control, Touchscreen LCD display
Filament dryer for up to 4 spools simultaneously with 8 outlets each for direct printer operation. Heats thanks to PTC heating with 3 fans up to 70 °C and maintains temperature stability at ±3 °C. Automatic humidity control and touchscreen display for easy operation.
CHF122.95
Incl. VAT and recycling fee
More than 10 available
- Free shipping with Swiss Post
- Us de Bärge – shipped from Thusis
- 60 days free returns
- Price match guarantee
Description
The Sunlu FilaDryer S4 dries up to four filament spools with a maximum weight of 1 kg each simultaneously and offers eight filament outlets, so multiple printers can be supplied directly from the device in parallel. The interior measures 45 x 21 x 21.1 cm and accommodates common spool diameters for filaments from 1.75 to 3.00 mm. Supported materials include PLA, ABS, PETG, TPU, PA, and PC.
A PTC heating system with three fans brings the interior to approximately 50 °C in 30 minutes and reaches a maximum of 70 °C, with temperature stability of ±3 °C for uniform drying of all spools. Automatic humidity control starts the drying process at 30–50 % relative humidity and stops it at approximately 25 %, while a touchscreen LCD display handles operation and monitoring. With a rated power of 320–330 W and an operating voltage of 100–240 V at 50–60 Hz, the device is suitable for worldwide use.
Specifications
| General | |
|---|---|
| Filament Spool Capacity | 4 |
| Maximum Weight per Spool | 1 kg |
| Number of Filament Outlets | 8 |
| Display | Touchscreen LCD |
| Dimensions | |
| Interior Dimensions (L x W x H) | 45 x 21 x 21.1 cm |
| Technical data | |
| Rated Power | 320–330 W |
| Operating Voltage | 100–240 V |
| Grid Frequency | 50–60 Hz |
| Maximum Temperature | 70 °C |
| Warm-up Time to 50 °C | 30 min |
| Temperature Stability | ±3 °C |
| Heating System | PTC heater with 3 fans |
| Humidity Control | Automatic, starts at 30–50 %, stops at approximately 25 % |
| Compatibility | |
| Supported Materials | PLA, ABS, PETG, TPU, PA, PC |
| Supported Filament Diameters | 1.75 / 2.85 / 3.00 mm |