Sunlu PLA+ Silk Filament Brass silky-glossy
Silky-glossy finish, No heated bed required, Dimensional accuracy ±0.02 mm, Tensile strength 60.6 MPa, Compatible with common FDM printers
Sunlu PLA+ Silk is a filament with a silky-glossy surface in brass for decorative and artistic 3D prints. It does not require a heated bed and impresses with dimensional accuracy of ±0.02 mm. Thanks to broad compatibility, it can be used on common FDM printers from Bambu Lab, Creality, Prusa and Anycubic.
CHF31.95
Incl. VAT and recycling fee
More than 10 available
- Free shipping with Swiss Post
- Us de Bärge – shipped from Thusis
- 60 days free returns
- Price match guarantee
Description
Sunlu PLA+ Silk in brass is a filament with a silky-glossy surface finish, particularly suitable for decorative, artistic and creative print objects. The smooth, glossy appearance of the finished models is created during printing itself, eliminating the need for post-polishing.
With a density of 1.25 g/cm³, a melting temperature of 164 °C and a melt flow rate of 9 g/10 min, the material can be processed uniformly. The Vicat softening temperature is 54 °C, the heat deflection temperature is 53 °C. Mechanically, the filament exhibits a tensile strength of 60.6 MPa, an elongation at break of 6.3%, a flexural strength of 65 MPa, a flexural modulus of 2760 MPa and an impact strength of 4.2 kJ/m².
A heated bed is not required, which simplifies printer setup. The dimensional accuracy of ±0.02 mm supports stable material feed and repeatable results. The filament is compatible with most FDM printers, including models from Bambu Lab, Creality, Prusa and Anycubic.
Specifications
| General | |
|---|---|
| Color | Brass |
| Technical data | |
| Heated bed required | No |
| Dimensional accuracy | ±0.02 mm |
| Density | 1.25 g/cm³ |
| Vicat softening temperature | 54 °C |
| Heat deflection temperature | 53 °C |
| Melting temperature | 164 °C |
| Melt flow rate | 9 g/10 min |
| Tensile strength | 60.6 MPa |
| Elongation at break | 6.3 % |
| Flexural strength | 65 MPa |
| Flexural modulus | 2760 MPa |
| Impact strength | 4.2 kJ/m² |
| Compatibility | |
| Compatible printers | Bambu Lab, Creality, Prusa, Anycubic (FDM printers) |
| Material | |
| Material type | PLA+ Silk |
| Surface finish | Silky-glossy |