Sunlu PLA Glow W-G Filament 1.75mm White-Green 1kg
Glows in the dark, Diameter 1.75/3.0 mm ±0.02 mm, Approximately 330 m of filament per 1 kg spool, Print temperature 200–210 °C, Compatible with FDM 1.75 mm printers
Glow-in-the-dark PLA filament in white-green that glows after light absorption. With a diameter of 1.75 mm and tight tolerance for uniform filament feed, it is suitable for all common FDM 3D printers. The 1 kg spool provides approximately 330 m of filament.
CHF35.95
Incl. VAT and recycling fee
More than 10 available
- Free shipping with Swiss Post
- Us de Bärge – shipped from Thusis
- 60 days free returns
- Price match guarantee
Description
The Sunlu PLA Glow W-G is a phosphorescent PLA filament in white-green that glows in the dark after absorbing light. This makes it particularly suitable for decorative objects, gadgets and models that reveal their full effect after nightfall.
The filament diameter of 1.75/3.0 mm is manufactured with a tolerance of ±0.02 mm, which supports uniform material feed during printing. Recommended print temperatures are 200 to 210 °C and print speeds of 50 to 100 mm/s, with a bed temperature of 50 to 65 °C with heating or without heating with adhesive. With a tensile strength of 11 to 16 kgf and a heat deflection temperature of 55 °C, the material offers the form stability typical of PLA.
The 1 kg spool corresponds to approximately 330 m of filament with a diameter of 1.75 mm and is compatible with all common FDM 3D printers that support this diameter.
Specifications
| General | |
|---|---|
| Color | White-Green |
| Glow effect | Glows in the dark after light absorption |
| Technical data | |
| Filament diameter | 1.75/3.0 mm |
| Diameter tolerance | ±0.02 mm |
| Print temperature | 200–210 °C |
| Bed temperature | 50–65 (with heating, without adhesive) / without heating with adhesive °C |
| Tensile strength | 11–16 kgf |
| Melt flow rate | 7–9 g/10min |
| Elongation at break | 4 % |
| Melting temperature | 165–180 °C |
| Heat deflection temperature | 55 °C |
| Density | 1.24 g/cm³ |
| Water absorption | 0.5 % |
| Recommended print speed | 50–100 mm/s |
| Weight per spool | 1 kg |
| Filament length (1.75 mm, 1 kg) | 330 m |
| Compatibility | |
| Compatibility | All common FDM 3D printers with 1.75 mm filament |
| Material | |
| Material | PLA |
More Information
| Material | PLA |
|---|