Sunlu PETG Filament White
Tensile strength 53 MPa, Impact strength 2.7 kJ/m, Flexural strength 77 MPa, Thermal stability up to 68 °C, Color white
Sunlu PETG filament in white with good interlayer adhesion and high impact resistance. Suitable for functional parts with stability and durability requirements.
CHF21.95
Incl. VAT and recycling fee
More than 10 available
- Free shipping with Swiss Post
- Us de Bärge – shipped from Thusis
- 60 days free returns
- Price match guarantee
Description
Sunlu PETG filament in white is a 3D printing material with a density of 1.27 g/cm³ and a melting temperature of 195 °C. It bonds well between layers and thus enables uniform, structurally stable prints with low warping tendency.
With a tensile strength of 53 MPa, a flexural strength of 77 MPa and an impact strength of 2.7 kJ/m, the filament is suitable for components subjected to mechanical loads. The Vicat softening point and heat deflection temperature are each 68 °C, which gives the material a certain temperature resistance.
Specifications
| General | |
|---|---|
| Color | White |
| Technical data | |
| Density | 1.27 g/cm³ |
| Vicat softening point temperature | 68 °C |
| Heat deflection temperature | 68 °C |
| Melting temperature | 195 °C |
| Melt flow rate | 5.3 g/10min |
| Tensile strength | 53 MPa |
| Elongation at break | 17.3 % |
| Flexural strength | 77 MPa |
| Flexural modulus | 2226 MPa |
| Impact strength | 2.7 kJ/m |
| Material | |
| Material | PETG |
More Information
| Material | PETG |
|---|