FNIRSI
FNIRSI SG-002 Signal Generator ±12 V / 0–24 mA
±12 V / 0–24 mA signal output, Accuracy ±0.05 V / ±0.05 mA, Active and passive, 2/3/4-wire, Battery 1100 mAh / 3.7 V, 4-digit LED display
The FNIRSI SG-002 is a multifunctional voltage and current signal generator for industrial automation, PLCs, service and calibration. It covers ±12 V and 0–24 mA and supports active and passive outputs in 2-, 3- and 4-wire wiring. Thanks to battery operation and compact dimensions, it is also suitable for mobile use.
CHF34.95
Incl. VAT and recycling fee
More than 10 available
- Free shipping with Swiss Post
- Us de Bärge – shipped from Thusis
- 60 days free returns
- Price match guarantee
Description
The FNIRSI SG-002 generates precise voltage and current signals for testing, diagnosis and commissioning of analog measurement and control circuits. It covers a voltage range of ±12 V with numerous selectable modes and a current range of 0–24 mA according to the standards 0–20 mA and 4–20 mA and achieves an accuracy of ±0.05 V and ±0.05 mA respectively after calibration. Through support for active and passive outputs as well as 2-, 3- and 4-wire wiring, the device can be connected to PLCs, converters, valves and other components of industrial systems, even with load resistances up to 500 Ω.
Values can be adjusted coarsely or finely via a rotary encoder with 30 pulses per revolution, the four-digit LED display with eight brightness levels shows the actual value, percentage value or special modes. Settings are automatically retained after a restart, and quick-start points can also be programmed. The signal connections are made via removable terminal blocks.
The SG-002 can be powered via an external power supply of 15–30 V, via Micro-USB at 5 V or via the built-in 1100 mAh battery at 3.7 V, and can continue to operate even during the charging process. With dimensions of 89 × 69 × 28 mm, it is suitable for mobile use in service, calibration, laboratories and training.
Specifications
| General | |
|---|---|
| Device type | Multifunctional voltage and current signal generator |
| Application field | Industrial automation, PLCs, service, calibration, laboratories, training |
| Calibrated to | Factory standard (with certificate) |
| Dimensions | |
| Product length | 89 mm |
| Product width | 69 mm |
| Product height | 28 mm |
| Technical data | |
| Voltage output range | ±12 V |
| Available voltage modes | ±12 V, ±5 V, 0–10 V, 2–10 V, 0–5 V, 1–5 V, 0–3.3 V, 0–2.5 V, 0–1 V, –10–0 V |
| Current output range | 0–24 mA |
| Supported current standards | 0–20 mA, 4–20 mA, 0–24 mA |
| Voltage accuracy after calibration | ±0.05 V |
| Current accuracy after calibration | ±0.05 mA |
| Maximum load resistance (current) | 500 Ω |
| Current output type | Active and passive |
| Value adjustment | Coarse and fine (rotary encoder) |
| Encoder pulses per revolution | 30 |
| Display | 4-digit high-brightness LED |
| Display brightness levels | 8 |
| Display modes | Actual value, percent, special modes |
| Settings memory | Automatic restoration after restart |
| Programmable quick-start points | Yes |
| External power supply | 15–30 V |
| USB power supply | Micro-USB, 5 V |
| Battery capacity | 1100 mAh |
| Battery voltage | 3.7 V |
| Operation while charging possible | Yes |
| Signal connectors | Removable terminal blocks |
| Compatibility | |
| Supported wiring configurations | 2-, 3- and 4-wire |
More Information
| Battery capacity | 1100 mAh |
|---|